Practical experience with Diplexin S-100 as a 1:1 substitute for sodium sulphide flakes
Diplexin S-100 is used in industrial wastewater treatment for the precipitation of complexed metals.
As a liquid product with the same concentration and mode of action, Diplexin S-100 is a real 1:1 alternative to sodium sulphide 60-62% in dry flake form. Crystallisation does not occur with liquid Diplexin S-100 despite the high concentration of active ingredient.
RESIN-Clean EXP-3/M-V2 - Highly efficient special cleaner
Replacement of Dimethylformamide (DMF) - Cleaning of flame laminating rollers
The EU further restricts the use of dimethylformamide. The tightening of the regulation creates considerable problems with regard to the marketing, production and especially the use of dimethylformamide (DMF).
DMF is used, among other th (...)
Diplexin HP - 09
Especially for highly complexed Zn-Ni waste water - The new heavy metal precipitant
With the new and highly efficient heavy metal precipitant Diplexin HP - 09, developed by F&S, almost all rinsing waters of zinc-nickel electrolyte types can be treated safely and reproducibly.
The required metal limit values can be achieved at any time.
Succession plan of F&S
Dear customers, suppliers and business partners,
It is our pleasure to inform you that the successful succession plan of F&S could be implemented as of 01 June 2019!
RESIN-Clean UHP-N - THE water-based and pH-neutral paint remover and stripper!
The new development in the field of paint, lacquer and coating removal with maximum effect and highest employee and environmental protection!
Polyurethane Solutions Expo 2019
Successful participation of Färber & Schmid at the PSE 2019 in Munich!
For the first time Färber & Schmid GmbH participated at the PSE in Munich in March 2019. The extraordinary interest of already existing customers as well as of many potential national and international companies was very high!
Färber & Schmid make their 2nd appearance at the European Coatings Show in Nuremberg!
After the huge success of Färber & Schmid’s first appearance at ECS 2017 in Nuremberg, it was obvious that they would appear once again this year at the European Coatings Show from 19th - 21st March 2019 in Nuremberg!
Replacemant for dimethyl formamide (DMF) - Cleaning of laminating rollers from polyurethane adhesives
SOLVETAN - Speciality Cleaner
DMF has almost no well-functioning alternatives. That is why this solvent is still used for cleaning the laminating rollers in the laminating industry. Since DMF is classified both as acutely toxic and toxic for reproduction, the user faces the problem of protecting their employees and the environment.
Modified wastewater treatment process for electroplating wastewater containing metal-complexes!
A long-established, German-based, international company dealing in surface coating materials contacted Färber & Schmid in October 2017. As a result of altered compositions of the electroplating process chemicals (higher proportion of complexing agents and organic substances), it became increasingly difficult to comply with the required heavy metal limit values.
Replacing NEP - special cleaning agents for the polyurethane processing industry
RESIN Clean EXP-3/M-V2 special cleaning agent
Trusted solvents such as NEP are still used in an extremely wide range of applications, particularly in polyurethane processing.
The older News you will find in our Archive
|Färber & Schmid AG||Lerzenstrasse 19 A||CH- 8953 Dietikon 1||Tel. +41 (0) 43 322 40 40||Fax +41 (0) 43 322 40 email@example.com||www.faerber-schmid.ch|
|Färber & Schmid GmbH||Asangstrasse 132||D- 70329 Stuttgart||Tel. +49 (0) 7429 435 9933-0||Fax +49 (0) 7429 435 firstname.lastname@example.org||www.faerber-schmid.de|